What To Do If Your Water Heater Unexpectedly Stops Working
What To Do If Your Water Heater Unexpectedly Stops Working
Blog Article
We've unearthed this article relating to What Would Cause My Electric Water Heater to Stop Working? below on the internet and decided it made sense to talk about it with you here.
Numerous modern-day houses make use of an electric hot water heater for their heating unit, as a result of its benefit and also simplicity of use. Nonetheless, much like any other electric home appliances, troubles may emerge with its usage, all of a sudden. It can be really discouraging to awaken to a chilly shower as opposed to a hot one or having your bathroom with water that isn't warm sufficient or perhaps too warm. Whatever the case might be, hot water heater problems can be fairly nerve-racking. Luckily, we have actually made a listing of feasible solutions to your hot water heater concerns. There are a number of aspects that could trigger most of these problems, maybe a concern with the power supply, the electrical burner, or the thermostat. Prior to doing anything, ensure you shut off the major power supply for safety. Whatever the problem is, getting it taken care of should not position way too much of an issue if you adhere to these steps:
Call An Expert:
If after changing all defective components and resetting your temperature, the hot water heater still isn't working, you may require to contact a professional plumber for a specialist opinion. The issue with your heating system could be that the hot and cold faucets have actually been switched or it may be undersized for the quantity of warm water needed in your house. Whatever the instance may be, an expert plumber would certainly aid resolve the issue.
Examine Your Power Supply:
As basic as this may appear, it is really necessary. Without adequate power, your water heater will not work. So the first thing to do when your water unexpectedly retires is to validate that it isn't a power trouble. Examine if the fuse is burnt out or the circuit breaker tripped. If the circuit breaker is the issue, simply turn it off and on once again. Replace any type of damaged or worn-out fuse. Evaluate the home appliance with power after these modifications to see if it's now working.
Inspect Your Thermostat:
If your water heater still isn't working or the water coming out isn't hot enough, you may need to check the temperature settings on your top thermostat. Ensure the breaker is turned off prior to doing anything. Open up the accessibility panel and also press the red switch for temperature reset above the thermostat. This should help heat the water. Turn the circuit breaker back on as well as inspect if the issue has been fixed.
Inspect the Burner in the Hot Water Heater:
If it's not a power issue, after that attempt taking a look at your heating element if it is still working. Evaluate each of your heating elements to make sure the issue isn't with any of them. If any of them is damaged, change that component and then check whether the hot water is back on.
Final thought
Water heater problems are not always significant. A lot of them are due to minor concerns like a blown fuse or damaged burner. Changing the defective parts ought to do the trick. However, if you are still incapable to fix the problem, give a call to your local plumber to find to get it repaired.
What Would Cause My Electric Water Heater to Stop Working?
Your water heater is one of the most forgotten-about appliances in your home—until it quits working. Once you realize that there’s no hot water, the water heater jumps up to become the most noticeable appliance you have. No one in your family will be happy until you get the water heater fixed.
To fix an electric water heater as soon as possible, follow the troubleshooting advice discussed below.
Basic Water Heater Troubleshooting
Fortunately, you may be restore the hot water supply simply by resetting the house circuit breaker for the water heater. A tripped circuit breaker is one of the top causes of water heater failures. Shut the hot water heater breaker off then turn it back on. Give the water heater a half hour to heat up (if it’s working) and then check for hot water through one of your faucets.
If you get hot water after resetting the breaker, then the problem may be fixed if the breaker inadvertently tripped and it doesn’t continue tripping.
If the water heater breaker trips again, then you’ll likely need to have a service technician examine and repair the water heater. The service technician will check the circuit breaker and electrical supply wiring for the water heater. A short in the supply wiring or a bad circuit breaker could be causing the breaker to trip. An internal failure such as a broken heating element can also cause the breaker to continue tripping.
When resetting the water heater circuit breaker doesn’t work at all, then the water heater may be getting power while an internal water heater failure is causing the problem.
Conduct Advanced DIY Water Heater Troubleshooting
If the water heater doesn’t work after resetting the high-temperature limit switch, then you’ll need to either conduct some advanced water heater troubleshooting or have a service technician diagnose and repair the water heater failure.
Sears Technicians created a safe and highly-successful DIY advanced troubleshooting video to help you determine the cause of a water heating failure if you want to try to fix the problem yourself. Follow the advice in this video to find and fix the cause of the heating failure on your own:
The video begins with the basic troubleshooting described in the first 2 sections described above. It then goes on to guide you through checking water heater components to safely find the cause of the water heating failure.
If you get to a point in the troubleshooting where you’re not completely confident that you can safely continue, schedule a service technician to diagnose and repair the water heater.
The DIY water heater troubleshooting shown in the above video differs from the diagnosis techniques that service technicians typically use when examining a water heater to find the cause of a heating failure. Safe DIY troubleshooting doesn’t rely on live voltage checks while service technicians often use live voltage checks to quickly find the cause of water heater failures.
While many DIY’ers have been able to find the cause of water heater failures using troubleshooting advice shown in the video, some failures such as a bad circuit breaker can only be found using live voltage checks which should only be conducted by a trained service technician.
Sears Technicians have the training, tools and expertise to quickly find the cause of a water heater failure. Rely on our technicians to diagnose and repair your water heater or any other appliance in your home that quits working.
While the technician is in your home, take advantage of appliance Cleaning & Maintenance offers that the tech discusses with you. Keeping your appliances well-maintained will help them work more efficiently and last longer. Regular professional maintenance will also help prevent costly breakdowns of the appliances you depend on every day.
https://www.searshomeservices.com/blog/what-would-cause-my-electric-water-heater-to-stop-working
I found that blog entry about How to Troubleshoot and Repair an Electric Water Heater when looking around the internet. Sharing is good. You just don't know, you will be doing someone a favor. We truly appreciate reading our article about Hot Water Heater Repair.
Schedule An Appointment
Report this page